cam help
cam help i was thinking of going with a custom grind cam from comp cams that someone is selling online. it is 239/245 .541/.541 on 1.5 rr. would this cam be too big for non ported heads. i dont have the money for all the cam stuff and to get my heads done. would i be able to run it for a few months then get the heads done later?
thanks,
matt
thanks,
matt
12 Second Club
Joined: Feb 2003
Posts: 167
Likes: 0
From: Minneapolis, MN
Your heads will definately be maxed out, but the car will still scream. That cam is a little bigger than the CC306 that I have and through stock heads I put down the numbers and times in the sig.
12 Second Club
Joined: Feb 2003
Posts: 167
Likes: 0
From: Minneapolis, MN
Originally Posted by 17WITHaBIRD
sould i get the cam and hold off on putting it in for awhile, untill i can get my heads done? that way i can put some 1.6 rr on it and it will be .577/.577.
I have been running around with the CC306 and stock heads since last june and probably won't get the heads done until this June or later depending on if I get a 9" rearend first.
