OBD1 tuning For turbo
#1
Teching In
Thread Starter
Join Date: Jan 2005
Location: Jacksonville, Tx
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
OBD1 tuning For turbo
I just did some more mods to my car and need a better tune.
I have a guy that tunes alot of turbo ls1 and he will tune my car but I have to buy my own editing and cable. What should I buy and where?
The last tune I had done was I think a tuner cat edit. The guy who tuned
it just ran about 10deg. of timing and set it way to rich. Still at 4200rpms
it made 350 and 430 at 5psi w/ no other mods and a junk trany.
The car is a 94 TA
Set up to run 8psi w/FMIC and a 50shot
Just installed 3200 stall and built tranny
Thanks for any help. I want to get this thing on the road.
I have a guy that tunes alot of turbo ls1 and he will tune my car but I have to buy my own editing and cable. What should I buy and where?
The last tune I had done was I think a tuner cat edit. The guy who tuned
it just ran about 10deg. of timing and set it way to rich. Still at 4200rpms
it made 350 and 430 at 5psi w/ no other mods and a junk trany.
The car is a 94 TA
Set up to run 8psi w/FMIC and a 50shot
Just installed 3200 stall and built tranny
Thanks for any help. I want to get this thing on the road.
#2
TECH Fanatic
iTrader: (6)
Join Date: Oct 2002
Location: Lake in the Hills, IL
Posts: 1,838
Received 0 Likes
on
0 Posts
well the easiest way is to get an obd1 tuning cable from here http://www.akmcables.com/ccard.htm and then download tunercat which has a 30 day free trial and after that its only like70 dollars.. It works well also