Water pump problem
went with the CSR and didn't have to do any cutting for the fans
you will need to do some modding to the factory water pump housing to seat the pump
I believe you have to put 4 half round "notchs" ....been a while when I did it
also put the pump on a 30/40 amp relay wired in ....4 wire is common the 5 wire allows a led connected to see and verify it running
do a search ....the internet has set and wiring ....dont have handy
Michael
"Thumper"
Trending Topics
The Best V8 Stories One Small Block at Time
Wow, definitely lots of good info. Thanks.
you'd have to ask gary if the same harness can be used (length issues maybe) on an F-body, but otherwise His wiring harnesses are top notch.
http://www.innovativewiring.com/Chev...lahomepage.htm
Matt
I love my CSI and yes you can leave the gear in or take it out. I took mine out and brought the gear to Autozone to get a freeze plug that fit.


