What do you think?
Thread Starter
Staging Lane
Joined: Jun 2004
Posts: 59
Likes: 0
From: Arcanum, Ohio
What do you think? Well i dynoed the car the other day and this is what i got.
Mustang Dyno 356HP and 319 lb ft of torque
Dnojet 377HP and 330 lb ft of torque
My car is H/C stock bottom end lt1 with a six speed and moser 12 bolt running 4.11 gears. The cam specs are 236/245 608/613 on 112lsa and the lift numbers are on 1.6 rr. The heads have 2.00 and 1.56 valves. They flowed 260 and 180 cfm's. The graph showed that the car was starting to flatten off around 6500-6600 rpm's due to a rich situation. We tried to lean it out but it wasnt coming out of it. To me the torque seems low for a heads and cam lt1 but i was wanting to get some other opinions. Thanks for any feedback.
Mustang Dyno 356HP and 319 lb ft of torque
Dnojet 377HP and 330 lb ft of torque
My car is H/C stock bottom end lt1 with a six speed and moser 12 bolt running 4.11 gears. The cam specs are 236/245 608/613 on 112lsa and the lift numbers are on 1.6 rr. The heads have 2.00 and 1.56 valves. They flowed 260 and 180 cfm's. The graph showed that the car was starting to flatten off around 6500-6600 rpm's due to a rich situation. We tried to lean it out but it wasnt coming out of it. To me the torque seems low for a heads and cam lt1 but i was wanting to get some other opinions. Thanks for any feedback.
