Just curious as to how many of you have or had not have problems with it? I have heard many things and I have been wanting to build that combo but leaning back towards the 383.,

 

I have run one now for 4 years with no problems. I had a 383 before this 396 and I would never go back. On my last years combo with hydraulic cam I put down 479 rwhp through a TH-400 and 9" and 691 rwhp with nitrous. So.....I have had good luck with it. Dont get me wrong though.....a 383 is still a hell of a good motor.

 

I've had one for 4 yrs now too w/ no problems mechanical wise. If it's built right you'll no problems from it.

 

No problems here with the motor. I just keep screwing up other ****.

 

http://cgi.ebay.com/ebaymotors/Lunat...spagenameZWDVW

 

Wow! Those are some phenomenal numbers, especially thru a TH-400 and 9 inch! What heads are you running?

 

Yeah I would also like to hear what kind of heads are being used and some suggestions on cam sizes.

 

AFR 227 LT4 heads. Custom grind hydraulic Crower cam. AFR rev-kit as well.

 

I figured you had to be running some kind of "aftermarket' head, to puttin' down those #'s..I think Overton's runnin' that head. Must be a pretty good choice

 

The 227 or 215 AFR and you can't go wrong