Is 41mm Too Big For A Front Sway Bar?
10-25-2005, 04:04 PM
#4
11 Second Club
iTrader: (35)
Join Date: Dec 2004
Location: NW Chicago burbs
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RoAdRaGe912
holy ****. that is a monster. i have a solid 32 mm BMR sway bar up front and the difference there was insane.
i'd pass on that thing.
i'd pass on that thing.
10-26-2005, 01:50 AM
#7
TECH Enthusiast
Join Date: Nov 2004
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
if you're going to beef it up then there's no reason to waste money on a hollow bar. stock 30 and the 32 from SS/WS6 are both hollow.
the solid 32 bmr made a whole world of difference but i did quite a few mods all at once. solid 21 rear, solid 32 front, STB, adj panhard rod, tubular lcas, lca relo brackets, and it already had 18s with short sidewalls and a prokit. i ran it with just the rear 21, relo brackets, prokit, and wheels/tires without any front sway bar and it still acted much better than stock.
i wasn't ready one time and almost ended up in the passenger seat. i thougt the rear was sliding out at first because it cut so hard, but then i ended up slouching over the console.
the solid 32 bmr made a whole world of difference but i did quite a few mods all at once. solid 21 rear, solid 32 front, STB, adj panhard rod, tubular lcas, lca relo brackets, and it already had 18s with short sidewalls and a prokit. i ran it with just the rear 21, relo brackets, prokit, and wheels/tires without any front sway bar and it still acted much better than stock.
i wasn't ready one time and almost ended up in the passenger seat. i thougt the rear was sliding out at first because it cut so hard, but then i ended up slouching over the console.
Trending Topics
10-29-2005, 10:34 AM
#8
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
alright thanks alot. they guy i was going to buy it from after i emailed him and asked him if he measured it right because it seemed too big . he emailed me back and said he measured it wrong or whatever,, im not going to trust this guy ill pass and wait for the next available one i come across.
