I need CAM info!! :)

Reply Subscribe

Thread Tools

Search this Thread

Feb 3, 2006 | 12:30 AM

ShadyPhi

Thread Starter

On The Tree

iTrader: (9)

Joined: Jul 2005

Posts: 116

Likes: 0

From: St. Louis, MO

I need CAM info!! :)

Ok, any opinions are welcome. My mods are in my sig.

I'd like to get a mild cam, nothing too extreme.

However, I'd like it to be a little bit more powerful than the LT4 hot cam. My main goal for this car is to get close to 400 hp.

Any suggestions? Thanks!

Last edited by ShadyPhi; Feb 3, 2006 at 12:39 AM.

Feb 3, 2006 | 12:35 AM

Speed Density

hashtagBMW

iTrader: (38)

Joined: Jul 2005

Posts: 6,572

Likes: 2

From: Boise, Idaho

Well a little bit more powerfull than the Hot cam would be the cc305 220/230 .510 .510 and then with 1.6RRs it ups your lift quite a bit. If i was you and i had 23k i would do a sick *** Head and cam package, that would easiley get you 400rwhp. IF your on a budget they also have some budget h/c packages too.
*www.eportworks.com
*www.advancedinduction.com

Feb 3, 2006 | 12:54 AM

ShadyPhi

Thread Starter

On The Tree

iTrader: (9)

Joined: Jul 2005

Posts: 116

Likes: 0

From: St. Louis, MO

I plan on new locks/spring/retainer & 1.6 roller rockers as well......... just an FYI

Feb 3, 2006 | 12:57 AM

Speed Density

hashtagBMW

iTrader: (38)

Joined: Jul 2005

Posts: 6,572

Likes: 2

From: Boise, Idaho

Are you going to touch the heads? Like porting them at all? I hear that with stock heads the cc503, cc305, cc306, hot cam, and a custom grind within the parameters of all those is gona pull pretty nicely. Some people on here have GM 847 but it all depends on your apllication and goals.