hot cam
hot cam i finally ordered my hot cam last nite now all im waitin on is the for new springs and 1.6 roller rockers. any suggestions on the springs and rr's? other than that im just waitin for the shop to finish bein built and the lift to be in and im gonna drop the motor out and get to work. let me know what yall think. all the other mods are in the sig.
TECH Enthusiast
Joined: Nov 2004
Posts: 660
Likes: 0
i wouldn't say they're plenty.........(even though i have them) 
they're designed for the lighter LT4 valves and are rated to .525" lift which is what the hotcam's lift is with 1.6s. the hotcam peaks out pretty early so people don't tend to spin it that high and coil bind isn't really an issue that often. i'm not saying they're crap, and i run them myself, but since you dind't get the kit i'd suggest going ahead and getting some better springs. those LT4 springs can be had for VERY cheap if you still want them. just contact jason cromer at sam taylor cadillac.
they're designed for the lighter LT4 valves and are rated to .525" lift which is what the hotcam's lift is with 1.6s. the hotcam peaks out pretty early so people don't tend to spin it that high and coil bind isn't really an issue that often. i'm not saying they're crap, and i run them myself, but since you dind't get the kit i'd suggest going ahead and getting some better springs. those LT4 springs can be had for VERY cheap if you still want them. just contact jason cromer at sam taylor cadillac.
Last edited by RoAdRaGe912; Feb 3, 2006 at 01:37 PM.
