Delteq and Dis-4
Delteq and Dis-4 Ok, ive searched the internet trying to find all the info i could.. so i oredered the Dis-4 because i was told that is the only one u could use almost. No im reading about Interface Modules? I searched it and MSD has some .. Has any one here done this before and if so school me along with it. Any thing will help. Thanks
I have all the stuff right now I'm putting on my 96 LT1 WS6 car. There are some informative people on this subject if you do a little searching and reading on this site. One guy on this site has the entire setup installed with really good pics. I think he has a 95 383 formula, but I can't seem to remember his screen-name right now 
https://ls1tech.com/forums/showthrea...9&page=1&pp=20
https://ls1tech.com/forums/lt1-lt4-modifications/452532-control-timing-delteq.html
Here is the start of my install with the Delteq. I will get to the other stuff this weekend.
https://ls1tech.com/forums/lt1-lt4-modifications/445676-uh-oh-somebody-busy-weekend.html
Hope this helps, Mike
https://ls1tech.com/forums/showthrea...9&page=1&pp=20
https://ls1tech.com/forums/lt1-lt4-modifications/452532-control-timing-delteq.html
Here is the start of my install with the Delteq. I will get to the other stuff this weekend.
https://ls1tech.com/forums/lt1-lt4-modifications/445676-uh-oh-somebody-busy-weekend.html
Hope this helps, Mike
Thanks alot i found that guy you were talking about the MSD coils with everything look bad ***.. but i got the full kit from Delteq so ill use was i got.. I just ordered the 4 Modules that i needed .. Now when i wire this thing up does the DIS-4 go right to those wires or do i still need to splice into the harness somewhere?
MSD PN 8870
I have tried the DIS-4 with the Delteq and I really didn't like it due to the amount of wiring. I went to start to car one day and no fire. I re-soldered all my connections to the interface modules and still no fire. I said **** it, cut all my wires and sold the stuff on Ebay. I think I am going back to the opti/single coil setup because I've killed the only option for timing retard with the Delteq. I need retard!
I have tried the DIS-4 with the Delteq and I really didn't like it due to the amount of wiring. I went to start to car one day and no fire. I re-soldered all my connections to the interface modules and still no fire. I said **** it, cut all my wires and sold the stuff on Ebay. I think I am going back to the opti/single coil setup because I've killed the only option for timing retard with the Delteq. I need retard!
