intake manifold???
Thread Starter
Launching!
Joined: Mar 2006
Posts: 209
Likes: 0
From: houston
intake manifold??? hey guys i am thinkin of gettin just the edelbrock performer intake manifold for my camaro, not the lt4 conversion just the 200 dollar manifold, ne one done this and noticed or heard of gains, and ne one know how long it would take to install???
Give us a link.
Sofar there is no production Edelbrock LT1 intake that is supposed to change though. I have my doubts about that one being an upgrade but show us what has your eye and we can try to help.
Sofar there is no production Edelbrock LT1 intake that is supposed to change though. I have my doubts about that one being an upgrade but show us what has your eye and we can try to help.
Thread Starter
Launching!
Joined: Mar 2006
Posts: 209
Likes: 0
From: houston
heres site yea im not tryin to do the le2 upgrade or wutever just like the 222 dollar edelbrock ones from this site http://store.summitracing.com/defaul...-127175&Nao=20
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Launching!
Joined: Mar 2006
Posts: 209
Likes: 0
From: houston
ok? ok so wut is that thing on the site i posted for 222 from edelbrock because that is the exact same thing as what was at the parts store and it says intake manifold on it and if it is this 4 barrel thing? can u explain the difference in that and the intake manifold to me and tell me bout perfomance gains from the 222 dollar one from the site??? cuz that is the one im lookin at getting
Thread Starter
Launching!
Joined: Mar 2006
Posts: 209
Likes: 0
From: houston
here it is **** that link dont work here let me jsut paste the text of the add on that site
heres the ad:
Edelbrock Performer T.B.I. Intake Manifolds
Intake Manifold, Performer TBI, Aluminum, Natural, Throttle Body, Chevy/ GMC, SUV/ Van/ Pickup, 5.0/ 5.7L, Eac...
Today $222.95
part #: EDL-3704
heres the ad:
Edelbrock Performer T.B.I. Intake Manifolds
Intake Manifold, Performer TBI, Aluminum, Natural, Throttle Body, Chevy/ GMC, SUV/ Van/ Pickup, 5.0/ 5.7L, Eac...
Today $222.95
part #: EDL-3704
TECH Enthusiast
Joined: Nov 2005
Posts: 520
Likes: 0
Originally Posted by djkyle25
**** that link dont work here let me jsut paste the text of the add on that site
heres the ad:
Edelbrock Performer T.B.I. Intake Manifolds
Intake Manifold, Performer TBI, Aluminum, Natural, Throttle Body, Chevy/ GMC, SUV/ Van/ Pickup, 5.0/ 5.7L, Eac...
Today $222.95
part #: EDL-3704
heres the ad:
Edelbrock Performer T.B.I. Intake Manifolds
Intake Manifold, Performer TBI, Aluminum, Natural, Throttle Body, Chevy/ GMC, SUV/ Van/ Pickup, 5.0/ 5.7L, Eac...
Today $222.95
part #: EDL-3704
That's a SBC intake not LT1. See the distributor hole in the rear? You're better off with the LT1 intake that's currently on your vehicle.
MIke
Launching!
Joined: Sep 2004
Posts: 265
Likes: 1
From: Norfolk, VA
No it wont fit at all. Please do some research on what motor you have. You have a Gen II smallblock, not a Gen I. Unless its LT1 specific, or you're converting, nothing they make will fit as of now.
It would work great on my '93 Suburban or my 79 Z28 tho. 
It's a Throttle Body Injected intake. 2 injectors mounted in a carb-like throttle body. Note that there are no injector bungs for your 8 injectors either...
You could MAKE it work for another few hundred dollars, but it certainly wouldn't be worth it. Especially that one.
It's a Throttle Body Injected intake. 2 injectors mounted in a carb-like throttle body. Note that there are no injector bungs for your 8 injectors either...You could MAKE it work for another few hundred dollars, but it certainly wouldn't be worth it. Especially that one.
if your going to get a intake.... get a victor jr and buy a throttle body and ****.... umm... i would grab a link to show you.. but im lazy... you get the idea though/...
