let me know what ya think..
Thread Starter
Launching!
Joined: Feb 2006
Posts: 216
Likes: 0
From: North Star, Ohio
let me know what ya think.. Here's a few pics of what i am currently working on. It's a 1996 Chevy S10 shortbed 2wd with a 94' LT1 and a th350 swap. The engine as of right now is currently stock with just a quick go through. Once it is running and the bugs worked out, it will be yanked stroked to a 383 with the parts in my sig. I am currently in the process of getting it ready for the cage to be installed in a few weeks.
The stock accessories are only on there to help me figure out how to make my alternator bracket, I will only be running an alt as the truck will have manual steering.
It's hard to tell in the photos but the truck sits LOW. It has belltech drop spindles and springs up front and dearched springs and drop blocks in the rear as well as a c-notch kit. Not sure how thats going to effect traction, we will see...
Before I started.
(yes thats a stock throttle body with the top part and bottom missing, it's only for mock up!)
Not much ground clearance and the dog house isn't even on yet.
Plenty of room
Gutted and yes those damn seats are gone too to be replaced with kirkeys
The stock accessories are only on there to help me figure out how to make my alternator bracket, I will only be running an alt as the truck will have manual steering.
It's hard to tell in the photos but the truck sits LOW. It has belltech drop spindles and springs up front and dearched springs and drop blocks in the rear as well as a c-notch kit. Not sure how thats going to effect traction, we will see...
Before I started.
(yes thats a stock throttle body with the top part and bottom missing, it's only for mock up!)
Not much ground clearance and the dog house isn't even on yet.
Plenty of room
Gutted and yes those damn seats are gone too to be replaced with kirkeys
TECH Enthusiast
iTrader: (5)
Joined: Feb 2006
Posts: 527
Likes: 0
From: king of prussia, pa (home) and williamsport, pa (school)
beautiful. i love when people appreciate cars/trucks and put *** load of time and energy into them. wish ya lots of luck with it ...
so far it looks awesome!!!
so far it looks awesome!!!
Thread Starter
Launching!
Joined: Feb 2006
Posts: 216
Likes: 0
From: North Star, Ohio
Thanks Guys!
Yeah my only issue will be getting it to hook properly, I think if I can manage that it should be nasty. I have no clue what it will run in the 1/4 but it should be interesting.
Yeah my only issue will be getting it to hook properly, I think if I can manage that it should be nasty. I have no clue what it will run in the 1/4 but it should be interesting.
