more fuel system pics (installed)
more fuel system pics (installed) I've got a few more pics of the install that I completed tonight (the back half).... I had to buy longer bolts to get the straps to fit and I had to notch the trunk area (see pics) to get the gigantic 12AN 90 degree fitting to fit....
I know some haven't had to do that from the look of the pics but I realize every car is slightly different and my tank might not fit the exact way it does on all cars....
So far I am VERY impressed with the fit and finish of the Nasty Performance stuff. Nate has been very helpful throughout and although a tight fit you can see the R&D that goes into this tank. without the pump and the filters on the side you could probably toss this thing a quarter mile cuz it's THAT light.... So if you buy one of these tanks you probably need 10mmx1.5x100mm bolts.... Those are what I used.... you might get away with shorter ones depending on your straps. And I highly recommend pre bending the straps using a vise beforehand that way they lay down and angle where the tank angles (cause the stock tank is rounded....) enjoy!
I know some haven't had to do that from the look of the pics but I realize every car is slightly different and my tank might not fit the exact way it does on all cars....
So far I am VERY impressed with the fit and finish of the Nasty Performance stuff. Nate has been very helpful throughout and although a tight fit you can see the R&D that goes into this tank. without the pump and the filters on the side you could probably toss this thing a quarter mile cuz it's THAT light.... So if you buy one of these tanks you probably need 10mmx1.5x100mm bolts.... Those are what I used.... you might get away with shorter ones depending on your straps. And I highly recommend pre bending the straps using a vise beforehand that way they lay down and angle where the tank angles (cause the stock tank is rounded....) enjoy!
Looks good, now hurry up and finish the install so we can see the finished product
