Just an update to the DELTEQ setup.. PICS
Just an update to the DELTEQ setup.. PICS Well,
I finally got the DELTEQ setup wired completely. The wiring job coming off the DIS coils looks as good as any factory OEM process. It took forever to cut length, solder, heat-shrink and loom the setup to look factory, but I am more than pleased with the final results! I also made a custom black powdercoat aluminum plate to mount the MSD DIS 4 and both MSD tach inter-rupters. Alot of thought went into this setup to make it look as if everything is a factory location. If anyone else is doing a similar DELTEQ setup you need to look at this in person, it will save you a bunch of time and really clean up the install. I even went to the trouble of looming the DIS 4 wiring down front fender. You can actually stand over the drivers side fender and make all the adjustment to the top of the MSD DIS 4 box
Here's some pics:
Finished:
I finally got the DELTEQ setup wired completely. The wiring job coming off the DIS coils looks as good as any factory OEM process. It took forever to cut length, solder, heat-shrink and loom the setup to look factory, but I am more than pleased with the final results! I also made a custom black powdercoat aluminum plate to mount the MSD DIS 4 and both MSD tach inter-rupters. Alot of thought went into this setup to make it look as if everything is a factory location. If anyone else is doing a similar DELTEQ setup you need to look at this in person, it will save you a bunch of time and really clean up the install. I even went to the trouble of looming the DIS 4 wiring down front fender. You can actually stand over the drivers side fender and make all the adjustment to the top of the MSD DIS 4 box
Here's some pics:
Finished:
Did you cut the spark plug wires to length of did you buy them that way?
I was thinking about putting my delteq by the radiator because I have my wires running over the intake, but I would not mind having them run behind the intake as you have them.
I was thinking about putting my delteq by the radiator because I have my wires running over the intake, but I would not mind having them run behind the intake as you have them.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by PipesTA
Once again, i hate you LOL. Looks great as always. Top notch!
Thanks for all the compliments guys,
ScrminWS6, ( I actually have the ELITE OVC's 9mm that are custom lengths. Actually it took 3 trys to get the wires to the correct length. You could do any number of manufacturers wires and cut them to length, but I preferred someone to do it for me.)
All the hardware and vavlecovers can still be purchased, but the LT4 valvecovers are going for ridiculous amounts of money new. I believe shoebox has a complete brakedown on his site.
It looks like its just sitting in there 
