Question on where to mount sensor

Reply Subscribe

Thread Tools

Search this Thread

Apr 22, 2006 | 10:06 AM

ThumpersZ28

Thread Starter

Staging Lane

iTrader: (1)

Joined: Apr 2005

Posts: 60

Likes: 0

From: Cleves, Ohio

Question on where to mount sensor

Need to know where to mount the electric oil pressure sending unit for gauge

Motor is the 1994 camaro 350 LT-1
No Headers ....factory exhaust

details and or pic's will be helpful

Thanks in advance

Michael "Thumper"

Apr 22, 2006 | 11:54 AM

Loadre

Launching!

iTrader: (5)

Joined: Feb 2004

Posts: 226

Likes: 0

From: Kingsport, TN

There will be an unused port on the block that is blocked off above the oil filter on the drivers side. You can either use that or you might have to 'T' it in with your stock oil pressure sending unit if it's mounted at the back of the intake (as opposed to the low mount version down by the oil filter)

Apr 22, 2006 | 12:30 PM

ThumpersZ28

Thread Starter

Staging Lane

iTrader: (1)

Joined: Apr 2005

Posts: 60

Likes: 0

From: Cleves, Ohio

Thanks for the reply

Sending unit is installed....will need to wait to fire motor now to see it works

cranking the motor doesn't seem to get enough pressure to see if it reads

Thanks for the reply

Michael "Thumper"

Last edited by ThumpersZ28; Apr 22, 2006 at 02:06 PM. Reason: added

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last