LT4 HOTCAM spec qeustion!!!
the full kit, with all bolt ons should push around 350 Hp with a good tune, or so I was told, my car is in the final stages and should be on the dyno soon, I will post the results as soon as I get them.
but what are you looking for, quite frankly if I get didnt that good fo a deal on it I would have gone with a bigger cam.
but what are you looking for, quite frankly if I get didnt that good fo a deal on it I would have gone with a bigger cam.
Last edited by LT1BRN; May 19, 2006 at 08:37 AM.
Teching In
Joined: Nov 2005
Posts: 25
Likes: 0
I put down 330 rwhp and 345rwtq on a Mustang dyno with just the hotcam kit with LTs and ORY. Still missing a lot of bolt-ons, so there is still a lot of room for improvement.
If you want to see the dyno graph and pics:
http://www.projectcamaro.net/forum/s...ead.php?t=7498
If you want to see the dyno graph and pics:
http://www.projectcamaro.net/forum/s...ead.php?t=7498
Trending Topics
this is what I did to my car and I hope I put down 350+whp, If I get 350 I will be really happy, aything more (whish I highly doubt) would be great.
Performance Mods: (Overhauled Engine)
.020 over size pistons, cam, fully roller valvetrane
(1.6rr's, springs, retainers, locks.. etc), Hardened push
rods, New heads with hand p&p, 58mm BBK TB, Moroso cold air
intake with High flow trick flow elbow , Hooker long tube
Headers, Ory, Magna flow cat back, ! all emission BS, fully
built A4 with trans Go Shift Kit, TCI torque converter.
Transmission oil cooler.
Non performance:
new cooling system, new fuel lines, new water pump, new oil
pump (high volume), new filters and fluids all around, new
wiring all around, including ignition and spark plugs, New
sensors all around.
I'm sure there is something that I missed, adn I might change the TB from 58 to 52, Im not sure yet.
Edit, wish some one would give ma an insight about the mods and the TB size.
Performance Mods: (Overhauled Engine)
.020 over size pistons, cam, fully roller valvetrane
(1.6rr's, springs, retainers, locks.. etc), Hardened push
rods, New heads with hand p&p, 58mm BBK TB, Moroso cold air
intake with High flow trick flow elbow , Hooker long tube
Headers, Ory, Magna flow cat back, ! all emission BS, fully
built A4 with trans Go Shift Kit, TCI torque converter.
Transmission oil cooler.
Non performance:
new cooling system, new fuel lines, new water pump, new oil
pump (high volume), new filters and fluids all around, new
wiring all around, including ignition and spark plugs, New
sensors all around.
I'm sure there is something that I missed, adn I might change the TB from 58 to 52, Im not sure yet.
Edit, wish some one would give ma an insight about the mods and the TB size.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
On The Tree
Joined: Jan 2004
Posts: 166
Likes: 2
From: Bahrain
Originally Posted by LT1BRN
this is what I did to my car and I hope I put down 350+whp, If I get 350 I will be really happy, aything more (whish I highly doubt) would be great.
Performance Mods: (Overhauled Engine)
.020 over size pistons, cam, fully roller valvetrane
(1.6rr's, springs, retainers, locks.. etc), Hardened push
rods, New heads with hand p&p, 58mm BBK TB, Moroso cold air
intake with High flow trick flow elbow , Hooker long tube
Headers, Ory, Magna flow cat back, ! all emission BS, fully
built A4 with trans Go Shift Kit, TCI torque converter.
Transmission oil cooler.
Non performance:
new cooling system, new fuel lines, new water pump, new oil
pump (high volume), new filters and fluids all around, new
wiring all around, including ignition and spark plugs, New
sensors all around.
I'm sure there is something that I missed, adn I might change the TB from 58 to 52, Im not sure yet.
Edit, wish some one would give ma an insight about the mods and the TB size.
Performance Mods: (Overhauled Engine)
.020 over size pistons, cam, fully roller valvetrane
(1.6rr's, springs, retainers, locks.. etc), Hardened push
rods, New heads with hand p&p, 58mm BBK TB, Moroso cold air
intake with High flow trick flow elbow , Hooker long tube
Headers, Ory, Magna flow cat back, ! all emission BS, fully
built A4 with trans Go Shift Kit, TCI torque converter.
Transmission oil cooler.
Non performance:
new cooling system, new fuel lines, new water pump, new oil
pump (high volume), new filters and fluids all around, new
wiring all around, including ignition and spark plugs, New
sensors all around.
I'm sure there is something that I missed, adn I might change the TB from 58 to 52, Im not sure yet.
Edit, wish some one would give ma an insight about the mods and the TB size.
