Ok guys right now i have SLP CAI and im buying a Ws6 style hood.... how do I go to LS1 style intake??? what parts do i need??? i know im gonna need new maf n elbow? what about radiator shroud??



oh BTW i have a 1996 Formula

 

You should ask this in the LT1 section to get more responses.

WS6 LT1's had the air filter sitting on top of the intake manifold. Wouldn't you want to do that instead? I would think mounting the filter like the LS1's would put the filter far away from the hood opening ruining the ram-air effect.

 

u realize that lt1 manifold is totally different then the ls1? so theres not gonna be just parts you can interchange

 

if you would read up there... you would notice im talking about air intakes not the intake manifold.... so re-read it.

 

I don't think he's talking about the actual intake manifold. Just the area between the throttle body and the air box. (or so I hope)

 

move this to LT-1 forum then.

 

get a ls1 lower box and lid you will need to grind down the lower box to fit the crossmember and as far as the throttle body to mass air i bought a slp bellow off ebay for like 49.00 but some are using the ferncos from lowes. maybee that will help you out some

 

something like this?

 

yah where do i find the lower box anyone know?

 

Im sure you can find the lower air box piece... ebay or on here. I used to have one, dont know where it went. Use can use some existing holes to bolt it in. You might have to drill a couple out.. but thats no biggie. Then you need the lid, filter, and a 3.5 inch rubber tubing from the lid to the throttle body.... I know it will be REAL close with hood clearance though....

 

I got it on ebay. did not drill any holes

 

hey what do i do about the MAF? can i delete that or do i need it?

 

you definatley need it. (analogy) would you get rid of your *****?

 

rofl hey streetwarrior check ur pm's bro

 

why do u need the MAF ? i have heard of people gettign rid of them.