Help? Intake Q
Help? Intake Q Ok guys right now i have SLP CAI and im buying a Ws6 style hood.... how do I go to LS1 style intake??? what parts do i need??? i know im gonna need new maf n elbow? what about radiator shroud??
oh BTW i have a 1996 Formula
oh BTW i have a 1996 Formula
You should ask this in the LT1 section to get more responses.
WS6 LT1's had the air filter sitting on top of the intake manifold. Wouldn't you want to do that instead? I would think mounting the filter like the LS1's would put the filter far away from the hood opening ruining the ram-air effect.
WS6 LT1's had the air filter sitting on top of the intake manifold. Wouldn't you want to do that instead? I would think mounting the filter like the LS1's would put the filter far away from the hood opening ruining the ram-air effect.
Last edited by HeapaShifter; Jun 18, 2006 at 01:44 PM.
get a ls1 lower box and lid you will need to grind down the lower box to fit the crossmember and as far as the throttle body to mass air i bought a slp bellow off ebay for like 49.00 but some are using the ferncos from lowes. maybee that will help you out some
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Banned
Joined: Jan 2003
Posts: 173
Likes: 0
From: Chicago area
Im sure you can find the lower air box piece... ebay or on here. I used to have one, dont know where it went. Use can use some existing holes to bolt it in. You might have to drill a couple out.. but thats no biggie. Then you need the lid, filter, and a 3.5 inch rubber tubing from the lid to the throttle body.... I know it will be REAL close with hood clearance though....
