Look at the progress we have made in 10yrs. 
Is it possible to have a 48 cc LT1 head?
Thread Starter
Joined: Jan 2005
Posts: 1,475
Likes: 1
From: Munfordville KY
Is it possible to have a 48 cc LT1 head? I bought a set of heads that were ported by MTI, and then worked over a little more by another shop before I got them. The heads were probably milled at least 3 times. I had my machinist mill them for straightness and cc them before I put them on my motor. He said that they cc'd 48. Is this possible?
Matt my MTI LT1 heads were down to 51CC and the guy redoing them wanted to take them down even more. BTW we got mine on the bench, 243CFM at .500 and flat line after that. So if you ever wondered what that heads flowed back in the mid 90s when the first h/c cars came out, thats it. Your maybe a lot more recent than mine and flow a lot better, my heads were done circa 1996.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
