Traction IS a problem?
i have 3:73 in my a4 and with my mods it still has a hard time spinnig but i`m happy about it because it hooks and go`s but if i stall it then turn it loss it will spin until i let go but to much pressure on that 10 bolt it will break i have a moser 12 bolt if you decide to change gear ratio just break down and get a stronger rear end you`ll save time, money and headach
Originally Posted by Formula_X
Sorry, I know this is LT1-LT4 forum but I couldn't help but post to this thread. I had no idea that LT1s had a problem burning out! Wow, I can't freaking stop burning out! Even at 1/4 throttle I spin em'. At 1/2 throttle I burn em' and at full throttle, I won't be going anywhere, just sitting there roasting the tires. I find it a problem when racing.
ha,ha j/k. Its all about the gearing 
Thread Starter
Joined: Oct 2005
Posts: 1,687
Likes: 0
From: Fairfax, Virginia
So I guess some people with 2.73s and good tires still spin off the line (idle). My car runs strong, but I can't do it. one problem might be the ORY hitting floor board and retarding timeing. I need to get LT4 knock module.
Originally Posted by Formula_X
Sorry, I know this is LT1-LT4 forum but I couldn't help but post to this thread. I had no idea that LT1s had a problem burning out! Wow, I can't freaking stop burning out! Even at 1/4 throttle I spin em'. At 1/2 throttle I burn em' and at full throttle, I won't be going anywhere, just sitting there roasting the tires. I find it a problem when racing.
and not all lt1's have trouble spinning tires, just A4's with 2:73 gears.
