Eagle Crank
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2006
Location: Dudley MA
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It is my understanding that gen 1 and gen 2 sbc's have different cranks besides the 2-pc and 1-pc main seals? Is this correct. My question is will a eagle crank part number 103523480 work in my 93 lt1? Summit Part Number is ESP-103523480. Also, will any sbc rods and pistons work in my lt1? Thanks
Sean
Sean
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That crank number will work, but the Scat 9000 cast crank is a much better piece, eagle parts are junk.
9-350-3750-5700-L - $229
9-350-3750-6000-L
One of those two depending on the rod length you choose.
Yes - rods and pistons are interchangeable. But the OEM cast Mahle's are lighter than the earlier SBC pistons and use a different ring pack.
9-350-3750-5700-L - $229
9-350-3750-6000-L
One of those two depending on the rod length you choose.
Yes - rods and pistons are interchangeable. But the OEM cast Mahle's are lighter than the earlier SBC pistons and use a different ring pack.