performance ?
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 86
Likes: 0
From: Louisiana
performance ? What performance should i look for with a set of ported LT-1 heads and that new Edelbrock air-gap intake manifold?Im about to buy the heads and the new intake manifold comes out in 2007.
i know edelbrock's late model stuff has suffered for the lt1's. they improved their ls1 stuff, but im not sure they will release any such product, as they've claimed it for at least a year now. IMO, i'd go with another port company to handle a ported lt1 or even single plain. i wont believe an edelbrock air gap until it is released.
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
We had a thread about that intake, Redneck. Summit has a listing and price for it. Now I know that doesn't really mean much, but I'd think it means more than just being on Edelbrocks site. Also I think the "ship date" said December, could be mistaken on that bit though.
Summit makes it standard practice to put a ship date out there and as it approaches repeatedly move it out farther.
The very best numbers I have heard out of Edelbrock are 7hp presumably flywheel and that ti will not fit stock heads without machining.
Rest assured though they will release something to satisfy the ignorant masses who ASSume it is an upgrade.
The very best numbers I have heard out of Edelbrock are 7hp presumably flywheel and that ti will not fit stock heads without machining.
Rest assured though they will release something to satisfy the ignorant masses who ASSume it is an upgrade.
Originally Posted by 96capricemgr
Summit makes it standard practice to put a ship date out there and as it approaches repeatedly move it out farther.
The very best numbers I have heard out of Edelbrock are 7hp presumably flywheel and that ti will not fit stock heads without machining.
Rest assured though they will release something to satisfy the ignorant masses who ASSume it is an upgrade.
The very best numbers I have heard out of Edelbrock are 7hp presumably flywheel and that ti will not fit stock heads without machining.
Rest assured though they will release something to satisfy the ignorant masses who ASSume it is an upgrade.
Originally Posted by GIZMO
In what world is 7 HP not an upgrade?
IMO if we want good parts we have to be more objective than most folks are. Met some guys at the strip the other day, I was running low 12s and they figured I had to have AFRs or LT4 and Hypercrap
. Then proceeded to tell me about this cold air intake he had on his car, one known to suckup water and has been responsible for a few blown motors, scoop directly in the airdam, puddle = 
, multiple "ramair" kits for this car with straighter path and almost no risk of water ingestion. Too many folks trust advertizing over results and I would say they are the average enthusiasts. Trending Topics
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
Well I can't see why it would need machining. There is an LT1 version and an LT4 version. As I stated in the other thread, just having the airgap is nice for racers since you can shove ice packs in there.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Formula350
Well I can't see why it would need machining. There is an LT1 version and an LT4 version. As I stated in the other thread, just having the airgap is nice for racers since you can shove ice packs in there.
Edelbrock is the one that has said it will mate to their heads fine but stock heads would need machining, if the people so dead set on this thing did the slightest bit of research they would come up with this info on their own.
