PCM pinouts?
1st project:
96 TA (my car) is getting a versa-fueler and need the pinout sheet so I can identify the injector wires at the pcm connector.
That way I dont have to tap in closer to the injectors where it will look sloppy.
2nd project:
95 Z28 M6 car were installing Accell DFI gen 7 standalone style completely replacing the pcm and engine wiring harness with the Accell stuff.
I need complete pcm pinout information so I can figure out which wires I need to keep or get rid of. Any pointers on getting the stock gauge cluster to work with this would be greatly appreciated.
Thanks in advance,
-Justin
They had 95 pcm pinouts, the link claimed to include 96 pinouts but did not see anything clearly labeled as being for a 96...
However the connectors are very similar so they should have similar wiring. Save for my 96 having a few extra non-important wires. (CPS, TCS, etc.) So Im gonna use them and see if it gets me where I need to be.
Thanks for reminding me about that site!


