Is it a problem if this is broken?

Reply Subscribe

Thread Tools

Search this Thread

Jan 18, 2007 | 03:09 PM

DirtyBird222

Thread Starter

Banned

iTrader: (7)

Joined: Jun 2005

Posts: 2,633

Likes: 0

From: Longwood/UCF, Fl

Is it a problem if this is broken?

Is a line that comes up with the 2 fuel lines. Goe under the intake elbow into the manifold I think?

Jan 18, 2007 | 03:43 PM

Ray@Nitrous Outlet

Guest

Posts: n/a

the red X owns

Jan 18, 2007 | 04:15 PM

the_merv

Banned

iTrader: (88)

Joined: Mar 2006

Posts: 21,019

Likes: 891

From: The Beach...

Try to put them pics on photobucket with a Camera, then post them. We don't see anything bud..

Jan 18, 2007 | 04:17 PM

AndyLT1

Teching In

iTrader: (2)

Joined: Dec 2006

Posts: 33

Likes: 0

From: Rochester, NY

It goes under the throttle body to the right side of the engine. It's an evaporative emission pipe. It connects to the bottom front of what must be the evap. sensor. It's between the valve cover and intake manifold 1/2 way between the front and back.

Jan 18, 2007 | 04:19 PM

DirtyBird222

Thread Starter

Banned

iTrader: (7)

Joined: Jun 2005

Posts: 2,633

Likes: 0

From: Longwood/UCF, Fl

shows up on my pc, but ill rehost them on fuelslut, will it cause any problems? the car isn't running anyways but just concerned

Jan 18, 2007 | 04:20 PM

the_merv

Banned

iTrader: (88)

Joined: Mar 2006

Posts: 21,019

Likes: 891

From: The Beach...

I had an idea it was that, wasn't sure..
I believe it's a vent line. The LS1 Cars don't have that, I am trying to figure out why not.

Jan 18, 2007 | 04:30 PM

DirtyBird222

Thread Starter

Banned

iTrader: (7)

Joined: Jun 2005

Posts: 2,633

Likes: 0

From: Longwood/UCF, Fl

My car has randomly been stalling out on me and dying randomly. Was curious one day after it just stalled to check to see if any pressure came out when I unscrewed the gas cap and it didn't. Car just stopped running all together today. Got it towed back to my apartment took the fuel pump out and everything seems to be sealed fine and everything looks to be connected the right way ect. (just changed the pump and the opti). Checked all the opti connections, plugs and wires, still don't have anything that seems like it would be cuasing the problem. I did do a ghetto spark test and pulled a plug and plug wire and grounded it on the body and tried turning over to see if there was any spark but nothing (or at least I couldn't tell from where I was looking from. Very little fuel comes out too when I press on the shrader vavle. Just confused as to what could be the problem and concerned if this needs to be fixed asap or not