Are LS1 and LT1 rearends the same??
Originally Posted by Imnotfast
The Diff's are alburn and the LS1's are the other one i cant remember the name of hahaha
Some of the LS1 came with Auburn I thought, Zexel Torsen is the other one
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
SIG PIC.... ls1 in my rearend. But i have no ABS and have ls1 brakes so it was a 45 min swap for me. Exact housing minus the ABS hook up. And all ls1 rears have the gear posi (torsen/zexle).
Originally Posted by Taubr Unit
SIG PIC.... ls1 in my rearend. But i have no ABS and have ls1 brakes so it was a 45 min swap for me. Exact housing minus the ABS hook up. And all ls1 rears have the gear posi (torsen/zexle).
Originally Posted by luckyou03
Im running an ls1 rear end in my car. I had to swap out the axles for my brakes and everything else was the same.
Did you have to swap the axles for the LT1 brakes to fit, or was it becuase of the abs? I'll be doing this swap shortly but I am going to delete the abs on my car anyway. Sounds like I might need to track down an extra pair of axles.
TECH Resident
Joined: Oct 2005
Posts: 781
Likes: 0
From: Taxme, Ohio
I replaced the Auburn cone in my 95 with a Torsen Zexel out of a 2000. No axle swap or anything. It was a direct replacement. The only thing that had me wondering was the reluctor ring was wider with the Auburn but my ABS worked exactly as before after the swap.
