bbk headers help
bbk headers help 
I have the shorties, as a plus the ceramic coating is still holding up decently, and the flanges are 5/8", I've only blown out one header gasket in over 3 years. Sadly enough I did that when the easiest bolt to re-tighten fell out.
I'd do long tubes right off the bat instead of shorties, if you can, don't know where your at and laws and such.
I'd do long tubes right off the bat instead of shorties, if you can, don't know where your at and laws and such.
Staging Lane
Joined: Nov 2006
Posts: 67
Likes: 0
From: Portland, OR
I don't think they make long tubes, I have the shorties(or are they mid-length?). I got them as a replacement for a cracked manifold more than anything. They improved the sound alot and may have added a few ponies but nothing real significant, if your going for gains go long tubes. The headers themselves fit great and with the coating still look new 7 years later, and no problems with the flanges or gasket leaks. The y-pipe on mine was banging the floorboard, I had to "tweak" it with a torch and prybars several times before I got it to stop.
