Formula383

iTrader: (8)

My new Canton valve covers just got in. Look pretty sweet to me. I can't wait to see what they look like on the motor!! Thanks again to Paul@SouthernSpeed!

fergymoto

iTrader: (129)

I've always wanted a set of those. How much did they set you back?

Formula383

iTrader: (8)

I believe they were listed at $225. Took about 3 weeks to get b/c Canton makes them to order.

fergymoto

iTrader: (129)

That's not bad. For some reason I thought I had seen someone say they were like $320 a while back and I thought that was a little steep for a set of valve covers for me.

onephatZ28

iTrader: (8)

MAN, they look cool as hell. post pic when you put them on the car.

C_Rules

iTrader: (7)

the fabbed look is killer. way better than those off te shelf covers. they make the engine bay look alot more mean.

lower90xcab

iTrader: (2)

My cantons on the motor.....I got my from Victory Racing for right at $200.

Red97Z

iTrader: (22)

Badass! I relocated my alternator down south so my notch in valve covers isn't needed. I have my eye on a set of summit's fabbed centerbolt valve covers. Very Nice!

84MonteSS

iTrader: (2)

they are slick as hell!

FASTFATBOY

iTrader: (23)

Those work with shaft rockers?


David

fergymoto

iTrader: (129)

Did you see the pics of them on the motor above? They will work with shaft mounts and still store a couple cans of pop

Quick96ss

iTrader: (7)

i got a pair of those for sale for cheap but they need to be fixed back. They didnt fit so i had them changed and they still didnt fit, so i went witha differnt pair. Pm if interested like i said cheap.

Quick96ss

iTrader: (7)

o and if your running a big rocker they wont work unless you specified that with canton...

Formula383

iTrader: (8)

Here's a few pics on the motor. These things are awesome pieces of work!! Looks like we may have to clearance the front passenger side valve cover to clear the rocker arm. It won't take too much.

Pavlock Performance

iTrader: (39)

Im building a motor for a guy that hydrolocled his! he has allot of money to play with and we are fabbing a set of covers for him they are looking sweet!

97lt1z28

iTrader: (1)

I take it those will work with the alternator in the stock location (becuase of the cutback in the pass. side valved cover. Those are **** by the way

Pavlock Performance

iTrader: (39)

thats how i did mine for this guy.. it will clear the alternator.. they are cake if you have the right equipment like a press break and now how to tig aluminum.. you get as many bends from the break as you can than tigs the face and back plates. the underside can be tricky though... good luck with your new set up!!!

94'BLKBRD

iTrader: (76)

there are some on ebay right now for $189.99+shipping
http://cgi.ebay.com/ebaymotors/Canto...02986041QQrdZ1

goodrich969

iTrader: (9)

those are down right baller.

Pavlock Performance

iTrader: (39)

those def. look nice.. will have mine posted soon..