need some numbers (918s)
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Aug 2006
Location: Walled Lake, Michigan
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
need some numbers (918s)
I have a hotcam want to do the 918 beehives. I need the numbers and good place to get them for the springs (918) and locks and retainers and anything else I need to install them on LT1 aluminum heads. thanks
#2
Internet Mechanic
iTrader: (17)
http://www.compperformancegroupstore...Category_Code=
HIGH PERFORMANCE GM LS1 VALVE SPRINGS
PART #26918-16
$238.88
http://www.compperformancegroupstore...Category_Code=
STEEL RETAINER FOR 26915 & 26918 SPRINGS
PART #774-16
OR
http://www.compperformancegroupstore...Category_Code=
TI RETAINER FOR 26915 & 26918 SPRINGS
PART #772-16
$312.48
As for the bottoms I am not sure, pm SStrokerAce
HIGH PERFORMANCE GM LS1 VALVE SPRINGS
PART #26918-16
$238.88
http://www.compperformancegroupstore...Category_Code=
STEEL RETAINER FOR 26915 & 26918 SPRINGS
PART #774-16
OR
http://www.compperformancegroupstore...Category_Code=
TI RETAINER FOR 26915 & 26918 SPRINGS
PART #772-16
$312.48
As for the bottoms I am not sure, pm SStrokerAce
Trending Topics
#9
Internet Mechanic
iTrader: (17)
Well thats well and good. So all post ill refer to you saying Comp Cam SA's work fine as long as you got the proper installed height of 1.800"
Running beehives meaning that he is running a decent cam, or some radical lobes, meaning having a NSA rocker is better for valvetrain stiffness and reliability in the upper rpms, so if he buys any rocker its prob going to be a comp cam, just NSA and be done with it.
If he is still running stamped rockers on the hotcam, then at least he doesnt have to rebuy stuff.
Running beehives meaning that he is running a decent cam, or some radical lobes, meaning having a NSA rocker is better for valvetrain stiffness and reliability in the upper rpms, so if he buys any rocker its prob going to be a comp cam, just NSA and be done with it.
If he is still running stamped rockers on the hotcam, then at least he doesnt have to rebuy stuff.
#12
Launching!
Thread Starter
iTrader: (4)
Join Date: Aug 2006
Location: Walled Lake, Michigan
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I am putting in the hotcam and have some 1.6rrs from a hotcam kit but am looking for valvesprings and I thought 918 would be good for it. just need to find out if they will adapt well.