When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am thinking about going with a custom cam from Bret for my build this summer, and am just wanting to see of anyone ha some vids of their car with a cam that he built.
he sent me a bunch of vids in email last year when i was talkin to him about gettin one. Email him and tell him what your lookin for and im sure he has a vid or sound clip of it.
fergymoto, how well does that cam perform in a 350? I love the way it sounds, thinking about it for my 355. What is your powerband and where are your shift points at?
FYI, that car I posted the clip of runs 11.70 at 121 on the motor, with a pcmforless base tune, stock 10 bolt, and launching SOFT so he didn't break anything...it's le2 heads on a 355 also.
fergymoto, how well does that cam perform in a 350? I love the way it sounds, thinking about it for my 355. What is your powerband and where are your shift points at?
It's a little big for a 350, mainly why I have ordered a custom grind from Bauer. I want to get the most out of my setup and this was not a good choice of cam for it IMO. My shift points are at 6300. We never did get to my peak power when dyno tuning it, we went to 6800rpm and the curve was still climbing, so we let it go up to 7000rpm and we got a little float. So we backed it off to 6800 and set the shift points at 6300. 7000 is a little much for the stock short block anyways.
If you like the sound, a smaller cam will sound similar if the idle is set lower. Mine idles a little higher than I would like, stock tach says ~1200rpm at idle.
Built 355 with LE2 cam on stock heads, sounds pretty good IMO. I told Bret I wanted the damn thing to lope, and this cam does just that. Money well spent, just need to fix all the bugs, and a new tranny. Then off to the track!!!
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.
7 Most Reliable High-Performance Engines GM Has Ever Built
Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.