At least it's been rectified. 
super pissed
super pissed Well I was installing my new Roller Rockers and Beehives today, and I was down to the last valve, and guess what the pack of Valve locks that I bought from Comp Cams was missing in half of a valve lock!!!!
What is going on?
Anybody else have this happen?
I am 100% sure I didnt drop it or lose it.
What is going on?
Anybody else have this happen?
I am 100% sure I didnt drop it or lose it.
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
Does any local places sell those locks? Have them give you one out of the kit and then warranty it out of their stock.
95t/a you should probably read the Newbie FAQ instead of hijacking a thread.
95t/a you should probably read the Newbie FAQ instead of hijacking a thread.
Originally Posted by 95t/a_coupe
What exactly is opti-spark, is it jus a high performance cap and rotor?
There are High-Performance replacement Cap & Rotor kits made for these, MSD for ex.
Usually it's a fine running part, but when it decides to **** on you, if you aren't too experienced with this Engine, you are in for a day of fun..
Originally Posted by 95t/a_coupe
i dont have the answer to that question... but I do have a question for you. What exactly is opti-spark, is it jus a high performance cap and rotor?
optispark is basically a flux capacitor, it makes you lose time haha,
just kidding its the distributor for the LT!
Originally Posted by Formula350
Does any local places sell those locks? Have them give you one out of the kit and then warranty it out of their stock.
95t/a you should probably read the Newbie FAQ instead of hijacking a thread.
95t/a you should probably read the Newbie FAQ instead of hijacking a thread.
I doubt it, they are 10 degree Comp Cams super locks, I dont think any manufacturer made 10 degree locks for any stock vehicles
who knows, but I am gonna be looking around today
ok I got good news, I called up Summit and talked to their senior customer service rep, he was a really cool guy, he said that they would send me a single lock tomorrow in the mail, it sucks because I havent finished the car, but at least they did me right
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo performance store hahaha, yea right, I am here in Corpus Christi / Kingsville for one more year, it really sucks here, there isnt even a dyno here, no performance shops, only a hand full of machine shops, no quarter mile, nothing, only stupid ricers and a few real car guys
Originally Posted by Captainofiron
ok I got good news, I called up Summit and talked to their senior customer service rep, he was a really cool guy, he said that they would send me a single lock tomorrow in the mail, it sucks because I havent finished the car, but at least they did me right
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
Ah, we have MAS, don't know what it stands for, but they are the only local shop I know of. Other than TPiS, but I don't know what kind of stuff they actually sell at their place. MAS has tons of stuff, even T-Bucket kits lol
That Sucks, Ya they took care of it, but man I hate getting to that point in a project only to be stuck and not be able o finish for a few days. Frustrating
So Corpus Christie not a hot bed of racing Eh
So Corpus Christie not a hot bed of racing Eh
Well Capt.
I am looking to either Dyno my beast next weekend or run the 1st 1/4mile. maybe both! Happy B-day to me
However they are closing one of our Tracks this summer and then it is an hour to a 1/8 mile and 1 1/2 to a 1/4(which is always booked) Sad for LA figures why they have a street racing problem. Tons of Rice here.
Gotta get those 32V heads. Suppressing a lot of power right now.
Where is home?
I am looking to either Dyno my beast next weekend or run the 1st 1/4mile. maybe both! Happy B-day to me
However they are closing one of our Tracks this summer and then it is an hour to a 1/8 mile and 1 1/2 to a 1/4(which is always booked) Sad for LA figures why they have a street racing problem. Tons of Rice here.
Gotta get those 32V heads. Suppressing a lot of power right now.
Where is home?
Originally Posted by Stroker396
Well Capt.
I am looking to either Dyno my beast next weekend or run the 1st 1/4mile. maybe both! Happy B-day to me
However they are closing one of our Tracks this summer and then it is an hour to a 1/8 mile and 1 1/2 to a 1/4(which is always booked) Sad for LA figures why they have a street racing problem. Tons of Rice here.
Gotta get those 32V heads. Suppressing a lot of power right now.
Where is home?
I am looking to either Dyno my beast next weekend or run the 1st 1/4mile. maybe both! Happy B-day to me
However they are closing one of our Tracks this summer and then it is an hour to a 1/8 mile and 1 1/2 to a 1/4(which is always booked) Sad for LA figures why they have a street racing problem. Tons of Rice here.
Gotta get those 32V heads. Suppressing a lot of power right now.
Where is home?
But right now I work for a NASA co-op so I will probably end up in Houston after school if I get hired
Originally Posted by Kage
Texas A&M Kingsville??
Originally Posted by Kage
Yeah their cust serv is #1.
summit #1