Intake performance On my ride INPUT!
96 Lt1 block align honed, bored 30thous, decked 10thous.
Stock crank
Stock rods
forged pistons
arp throughout
Milodon oil pan
GM847 cam 234/242 .575/.595
Comp double roller timing chain
CSR electric H20 pump
Comp hardened push rods
Comp 1.6 Pro Mags 7/16 stud
GTP STG 2 cylinder heads Stainless Steel 2.00/1.56
Gasket matched intake
30lb SVO injectors
52mm Throttle body
1LE intake elbow
Moroso CAI
custom tune
Hooker long tubes coated
off road ypipe
all 3 inch with qtp cutout into stock z exhaust repainted tips
11 to 1 compression ratio
Transmission- T-56, rebuild by Joe in Texas with spec stage 4 and hurst short throw
McLeod adjustable master cylinder drill mod and new slave cylinder
Rear end- Stock 10 bolt w/TA Girdle and 373s
100shot nitrous
-------
My stock intake is gasket matched but i only have a 52mm bbk throttle body what kind of gains would i get with a bigger throttle body thats ported to the intake with my mods????
Thanks guys
Jaron!


