EWP Roll Call!
Thread Starter
On The Tree
Joined: Jul 2005
Posts: 155
Likes: 0
From: Portsmouth, Ohio
EWP Roll Call! I will be having an Meziere H.D pump installed on the Formula. I have a pretty good idead on how I want it wired. I removed the A.I.R. system last year. I already have the wiring issue covered. Accept for 1 thing. The A.I.R. doesn't stay on constant. Where do I tap to get my constant source? Could I simply used a fuse-tap off a constant fuse?
If you have an EWP. pics, suggestions, anything will help out, thanks. Show your install.
If you have an EWP. pics, suggestions, anything will help out, thanks. Show your install.
I don't have any pics but I ran my power wire to the fuse box on the drivers side shock tower (err in front of it)... There you will easily find a tab with constant switched power that you can put a spade connector in. Anyone that gives you 12 volts when your key is turned to the on positioin. Or splice into a wire underneath it with one of those blue connectors that splice one wire into another at any part of the wire....
