LT1-LT4 Modifications 1993-97 Gen II Small Block V8

503 cam

Reply Subscribe

Search this Thread

Old

Jun 25, 2007 | 04:46 PM

#1

Thread Starter

On The Tree

iTrader: (3)

Joined: Mar 2007

Posts: 118

Likes: 0

Default

503 cam

will i need to use guideplates with this cam or can i get some self alining rockers to use i will also be using 1.6 rockers. thanks

Old

Jun 25, 2007 | 06:04 PM

#2

TECH Resident

iTrader: (8)

Joined: Jul 2004

Posts: 851

Likes: 0

From: Raleigh, NC

Default

Depends on the springs I think. Most will recommend NSA, though.

Old

Jun 25, 2007 | 07:24 PM

#3

TECH Veteran

iTrader: (53)

Joined: Feb 2004

Posts: 4,433

Likes: 0

From: Monticello, Kentucky

Default

If you have to buy rockers anyway, just go ahead and get the NSA's. If you already have SA's, then don't worry about it too much.

Old

Jun 25, 2007 | 08:04 PM

#4

11 Second Club

iTrader: (35)

Joined: Apr 2005

Posts: 4,798

Likes: 54

From: Skippack, PA

Default

When getting advice and a quote for install, Harris Speed Works who is a sponsor here said NSA 1.6RR's were too overkill for my setup (CC503 cam, Crane Springs on Stock Heads) so I went with Comp Cams Magnum SA 1.6RR's just to give you an idea.

Last edited by StealthFormula; Jun 25, 2007 at 11:18 PM.

Old

Jun 25, 2007 | 10:56 PM

#5

TECH Fanatic

iTrader: (13)

Joined: May 2006

Posts: 1,245

Likes: 15

From: Rockwall, TX

Default

Stealth, were you running the Crane 10308 springs?

Old

Jun 25, 2007 | 11:17 PM

#6

11 Second Club

iTrader: (35)

Joined: Apr 2005

Posts: 4,798

Likes: 54

From: Skippack, PA

Default

Quote:

Originally Posted by 69gto96z

Stealth, were you running the Crane 10308 springs?

Those are the springs I will be running in my setup next month

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 03:53 PM.