Head/cam package, what do I get?
07-10-2007, 10:14 PM
#21
Originally Posted by Z 2 8
Would this be the same with all A4 cars including LS1's?
Originally Posted by Z 2 8
Also, how would a 2800 stall do me and how much do they run? I wouldn't really want any more than a 3200 and I would get a tranny cooler as well.
Originally Posted by Z 2 8
I guess I'll go with a stall so I don't make a mistake. Do you guys think I will need a different intake manifold, or will the stock one be fine? I was thinking that an LT4 intake manifold would be better and would give me more power, but it that necessary? I really didn't want to get that because they are so expensive and Lloyd Elliot didn't mention anything...
07-11-2007, 09:14 AM
#22
Launching!
Thread Starter
Join Date: May 2006
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by infinitebird
yes.
2800-3200 would be good. Typically they run anywhere from 500-800 for a good one.
Stock manifold will be fine. Keep in mind, you can't run stock heads with the LT4 manifold, you would have to upgrade to aftermarket castings to do that.
2800-3200 would be good. Typically they run anywhere from 500-800 for a good one.
Stock manifold will be fine. Keep in mind, you can't run stock heads with the LT4 manifold, you would have to upgrade to aftermarket castings to do that.
Well, that's good news then. I was thinking that I was going to spend a bunch more money because I would need an LT4 intake manifold. Now, I can just use that money for a stall.
Do you guys suggest getting the Llyod Elliot heads and a different cam, or going with one of his matching cams?
Also, does anyone remember what Gonzo's setup was from f-bodyhideout. He had a maroon trans am that sounded sick.
07-11-2007, 09:41 AM
#23
Originally Posted by Z 2 8
Do you guys suggest getting the Llyod Elliot heads and a different cam, or going with one of his matching cams?.
You can also have Lloyd port your stock manifold for a few extra HP
He'll port it to match whatever TB you want to use and match the manifold
to the ported heads. There are pics of mine (and a shopping list of parts on my cardomain site (click sig).
- James
07-11-2007, 02:48 PM
#24
Hey Man, I Have A Le 1.5 Setup, Le1heads,le2cam, All The Supporting Mods Lloyd Asked. Thru 383hp And 375rwtrq.i Would Really Go With Eportworks. My Best Time Was 11.90 With An Auto Too.
07-12-2007, 08:06 PM
#26
Originally Posted by Z 2 8
11.90? Do you have like a yank 3800 stall or something? I can't imagine the car trapping more than 113 or so. An 11.9 is a really fast time.
I'm pulling 12.2s @ 110 with my fat ***, a full-weight car and a screwed up 10-bolt.
(About 12.0 corrected for DA)
I was pulling those on the 3200stall before I even installed the 4000.
Last edited by James Montigny; 07-12-2007 at 08:31 PM.
07-13-2007, 10:31 AM
#27
Originally Posted by Z 2 8
11.90? Do you have like a yank 3800 stall or something? I can't imagine the car trapping more than 113 or so. An 11.9 is a really fast time.
07-14-2007, 01:30 PM
#30
Originally Posted by Z 2 8
Oh, so you ran that time on nitrous?
