Ignition Help
Thread Starter
Staging Lane
Joined: Nov 2002
Posts: 61
Likes: 0
From: Orange Park "jax" FL
Ignition Help I am going to run Universal Taylor Spiro-pro wires on center bolt valve cover wire looms, so I never have to worry about burnt wires again. I was woundering how the opti would handle a MSD coil and 6A ignition box? Or is the stock ignition good enough for my set up ( Heads, Cam, L/Ts, Ect... and a 100 shot wet kit in the future) 
Re: Ignition Help if you plan on spraying nitrous i would advise to at least put the ign. box in. if you put the box and coil then thats even better. the LT1 ignition system is not as strong as the LS1 ignition system. you will be ok if you dont spray the car but its better to be safe than sorry when spraying 
