Project update..
Thread Starter
Joined: Mar 2006
Posts: 21,019
Likes: 893
From: The Beach...
Project update.. I know some of you guys are keepin an eye on this..here is what I got so far..
Looks like tomorrow it start day if everything goes right.
This is after today's work. I got a late start, ran into a couple of problems, but I have everything set for tomorrow. I got to get the Balancer on, and then it's goin together.
I re-located the Fan and Tranny Cooler to infront of the Radiator. I have a Manual Fan circuit and for some reason only 1 Fan will work, so I put it on the hot side of the Radiator. When it was on the Cold Side, it stayed at 190 when it was on and in traffic, so it should work out good. I have it wired to blow through.
I ran in to a problem with Motor Mounts and had to modify the ones on the K-member. I got it on it..the hard parts done. It's easy money from here.
This is a couple of pics of me finishing up for the day..
Looks like tomorrow it start day if everything goes right.
This is after today's work. I got a late start, ran into a couple of problems, but I have everything set for tomorrow. I got to get the Balancer on, and then it's goin together.
I re-located the Fan and Tranny Cooler to infront of the Radiator. I have a Manual Fan circuit and for some reason only 1 Fan will work, so I put it on the hot side of the Radiator. When it was on the Cold Side, it stayed at 190 when it was on and in traffic, so it should work out good. I have it wired to blow through.
I ran in to a problem with Motor Mounts and had to modify the ones on the K-member. I got it on it..the hard parts done. It's easy money from here.
This is a couple of pics of me finishing up for the day..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
TECH Enthusiast
Joined: Jul 2003
Posts: 697
Likes: 0
From: Evansville, IN
You're not gonna have any air movement through that tranny cooler when your sitting still. You would have been better off fixing the fan problem and leaving them in the original location. Looks like you got a nice little combo going together though. Keep us updated.
Thread Starter
Joined: Mar 2006
Posts: 21,019
Likes: 893
From: The Beach...
Originally Posted by smoknta
You're not gonna have any air movement through that tranny cooler when your sitting still. You would have been better off fixing the fan problem and leaving them in the original location. Looks like you got a nice little combo going together though. Keep us updated.
Thread Starter
Joined: Mar 2006
Posts: 21,019
Likes: 893
From: The Beach...
Originally Posted by LT1MAN
dont you love it when a plan comes together merv
Trust me...there will be all kinds of vids..
I am using the LT1 Radiator..it's the same as the LS1.
I am using a 1999 Camaro LS1 Harness, and a 2002 LS1 PCM. The Harness I built custom for the Car.
It's going to be great being a 1995 "OBDI" Car for Emissions...
Thread Starter
Joined: Mar 2006
Posts: 21,019
Likes: 893
From: The Beach...
Here is it after today's work..ran into a couple of snags, but that's going to happen.
Looks like tomorrow is the big day..all that is left is some wiring, hooking up the Fuel, then it's on..
Looks like tomorrow is the big day..all that is left is some wiring, hooking up the Fuel, then it's on..