Cold Air Intake
08-01-2007, 06:21 PM
#5
IMHO nothing is wrong with SLP, they are just WAY overpriced. You can get the same thing from some other company and pay less for it.
Anyway back to the CAI. The SLP CAI is a pia because it has 2 filters to stuff in the spot and it is much harder to take off and put on.
Anyway back to the CAI. The SLP CAI is a pia because it has 2 filters to stuff in the spot and it is much harder to take off and put on.
Trending Topics
08-01-2007, 08:20 PM
#8
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
A quality, brand name cold air intake is going to run $180.
I have seen the SLP, Moroso, and K&N all for that price on various sites.
They are worth the money, unless you want to do the lid conversion.
I would get the Moroso, and not because I have it. Because it fits good, its plastic, not metal, and the quality is great. I got mine used for $100 and its been great.
With your mods BSGreenZ, you'll pick up 8-12 rwhp.
I have seen the SLP, Moroso, and K&N all for that price on various sites.
They are worth the money, unless you want to do the lid conversion.
I would get the Moroso, and not because I have it. Because it fits good, its plastic, not metal, and the quality is great. I got mine used for $100 and its been great.
With your mods BSGreenZ, you'll pick up 8-12 rwhp.
08-01-2007, 08:27 PM
#10
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ABA383
I have a Lingenfelter and its been on since 1995..Very nice piece, works well, looks good and LPE has them for $159.00
--Alan
--Alan
Lingenfelter SuperTube Cold Air Intake:
http://www.ws6project.com/user_stor/...adb060b12e659d
Moroso Cold Air Intake:
http://www.ws6project.com/user_stor/...adb060b12e659d
08-02-2007, 01:08 AM
#13
You want to make something like that true cold air induction..cut the plastic out on the underside of the Car there, and make a little Scoop..
I cut out where my Fog Lights were, and the air is directed up the ducting in there and goes directly into the Lid setup I have.
I cut out where my Fog Lights were, and the air is directed up the ducting in there and goes directly into the Lid setup I have.
08-02-2007, 07:27 AM
#14
Originally Posted by the_merv
You want to make something like that true cold air induction..cut the plastic out on the underside of the Car there, and make a little Scoop..
I cut out where my Fog Lights were, and the air is directed up the ducting in there and goes directly into the Lid setup I have.
I cut out where my Fog Lights were, and the air is directed up the ducting in there and goes directly into the Lid setup I have.
08-02-2007, 08:05 AM
#15
TECH Resident
iTrader: (4)
Join Date: Mar 2004
Location: Houston,TX
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
I like my slp but it is a pain to change the filters. Not too hard but in comparison to other cai it is a bother. I think it looks the best in the engine bay but that is me. It does get heat soak faster too though so that is another downside, oh and the price. way too high. It was my first mod years ago and I wanted to make it "pretty" so I opted for slp
08-02-2007, 02:10 PM
#17
Originally Posted by LT1MAN
i did something quite similar. i used a little vent that lets your electrical wires go out of your house and into your breaker box. mounted it upside down on the plastic piece under the c.a.i. filter and now i have a ram air scoop!! lol, it works too. gets the filter dirtier faster but its worth it for that couple extra hp right!
08-03-2007, 09:05 AM
#19
Originally Posted by porksoda
IMHO nothing is wrong with SLP, they are just WAY overpriced. You can get the same thing from some other company and pay less for it.
Anyway back to the CAI. The SLP CAI is a pia because it has 2 filters to stuff in the spot and it is much harder to take off and put on.
Anyway back to the CAI. The SLP CAI is a pia because it has 2 filters to stuff in the spot and it is much harder to take off and put on.
