Hotcam LT1 dyno sheet
Originally Posted by RED94Z28
So i take it that the Lt4 hot cam kit is not well liked on here or what? Thinking about puttin it on mine
Thread Starter
Joined: Jun 2005
Posts: 376
Likes: 0
From: Charlotte, NC
Its a great cam for a DD, and it has plenty of power for its size. But i am a bit disappointed with how the torque falls pretty bad after about 4800rpm. I think that might just be mine though. I gotta look into it...
and they do make 19" radials.
http://www.tirerack.com/tires/tires....e1=yes&place=9
But i think id rather get a set of 17"s with radials instead of on these 19"s.
and they do make 19" radials.
http://www.tirerack.com/tires/tires....e1=yes&place=9
But i think id rather get a set of 17"s with radials instead of on these 19"s.
Nice, gives me hope....... Although I already have seen a rwhp number for the motor I have sitting here, so I'm not worried about hitting the same numbers you got out of the hotcam.
Originally Posted by MOE_TAWS6
Its a great cam for a DD, and it has plenty of power for its size. But i am a bit disappointed with how the torque falls pretty bad after about 4800rpm. I think that might just be mine though. I gotta look into it...
and they do make 19" radials.
http://www.tirerack.com/tires/tires....e1=yes&place=9
But i think id rather get a set of 17"s with radials instead of on these 19"s.
and they do make 19" radials.
http://www.tirerack.com/tires/tires....e1=yes&place=9
But i think id rather get a set of 17"s with radials instead of on these 19"s.
It looks like it was caused by valve float to me...
Originally Posted by ScreaminRedZ
Why would they be worthless? Drag radials don't have a wrinkle wall.
Looks like its time for some 918's moe
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
hmmmm very interesting. Well first off great numbers man. You have me rethinking about the hotcam. I was thinking of going with the CC503 i believe. But this looks pretty impressive. nice
im still curious for 2 things, why alvin uses the STD correction (not a big deal at all) and why he never said anything or dealt with your power drop off. Sure it seems like you have great peak numbers but your torque completely drops off the face of the earth way too early. Does he think its normal for you to be having that much of a drop off even when the rpms arent really that high at all.
Thread Starter
Joined: Jun 2005
Posts: 376
Likes: 0
From: Charlotte, NC
I talked to Alvin about it. He made a few suggestions, one being that the rockers might be a little too tight? So i think i might redo my rockers, than dyno it again, and see what happens.
