stuck ignition
Thread Starter
On The Tree
Joined: Jul 2007
Posts: 105
Likes: 0
stuck ignition ok well i have a 93 z28 and about a month ago i went to start my car and it started up and the ses light came on the abs inop came one and when i pulled the ebrake up the low coolent light came on when i hit the brake only the right brake light lit up and after about 2 min the radio went off and the ac went off. when i tried to turn it off the ignition was stuck it wouldnt budge, so i bumped it up like i was going to start it up while it was running, the starter engaged and i was able to turn the ignition off i havent done any electrical to my car . today it did it again. i never heard of this before.... i will be thankful for any help..
sounds like a short, check check ur ground near your hood release behind that plastic piece.. also find the radio's one and check the MAIN chasis ground (shoulda said that first) sounds like a huge grounding issue only does this once in a while u say?
I can only think of a reason why the key would stay stuck on but u might not have done it but this happened to my car none of the electrical stuff but the key thing yes, i went to turn off my car it did not want to turn back then i realized i had pulled the key out some which was keeping it from turning off i just pushed it in and it turned off fine maybe? maybe not but sounded similar..
Thread Starter
On The Tree
Joined: Jul 2007
Posts: 105
Likes: 0
ok well it did it twice today and the 2nd time i couldnt get it to turn off i had to take the ignition fuse out to cut the car off. i turned the key back and forth for a few min and i was able to get it out. while i was playing with it i noticed that when i turned it forward it felt like it was kinda catching on something. but i think im just going to hook up a push button start so that i just have to turn the key to the acc position so the fuel pump and every thing comes on and then start it up with the push button.
that would not be your ignition switch binding, that would be your lock cylinder. they have a good tendency to stick, in fact i changed mine about a month ago because i got pissed and broke the key off in the cylinder. (stupid decision) the switch is on top of the column under the dash, but they usually dont have a prob. ignore the lights for now, if your cylinder is binding, it is putting the switch in a different position, hence your dash lights like a christmas tree. i believe at cost from work (GM dealer) i spent about 100.00 for all the stuff. (lock cylinder, key, switch...) but another thing that tends to bind would be the rack in the column. adress this concern, or it gets REALLY aggravating.
Trending Topics
Thread Starter
On The Tree
Joined: Jul 2007
Posts: 105
Likes: 0
ok. thanks alot i tried to hook up a push button start straight to the starter but i had nothing but problems, when i went to losen up the bolt that goes form the bat to the starter i got the nut about half way off the damn bolt that it was on just cracked off of the starter... thank god for life time warranty.. i got the new starter and have just been driving it around till this weekend so i can work on it....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo yeah the push button straight to the starter wont work on these cars. my suggestion is fix it right, less probs in the future. the guy who had mine before me bypassed the VATS and holy **** it look me a few days to find it. FURIOUS was the word that comes to mind. let me know if you have any questions, pm me anytime.
