tranny cooler install question..
Thread Starter
Launching!
Joined: Feb 2006
Posts: 272
Likes: 0
From: South Carolina
tranny cooler install question.. hey this may be a stupid question but i just want to make sure. i bought the b&m supercooler and i assume it should be oriented vertically instead of horizontally so that the oil drops down the cooler instead of trying to cross it. is this correct? thanks.
nevermind. Vertically. Pressure (into the cooler) going in the top and returning out of the bottom.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Last edited by Scoggin Dickey; Jan 18, 2008 at 01:04 PM.
11 Second Club
Joined: Jul 2005
Posts: 1,089
Likes: 3
From: West Linn, Oregon
it all depends on airflow too, if you get the best airflow acrossed it laying horizontally then go that route, I remeber a while back seeing pics of someone mounting it before air deflector to force air through it horizontally...
