abs unit delete?
abs unit delete?...now removing with pics!!! has anyone deleted their abs unit i want to do it but im not sure what proportioning valve i need if i need any anyone got any suggestions?
Last edited by mean94lt1; Jan 24, 2008 at 12:43 PM.
i did mine, i didnt use a porportioning valve and mine work perfect. I had to hit my brakes HARD!! a few times and nothing locked up at all and im on slicks and skinnies!! So unless your a baller and want to spend money i wouldnt buy one. And i got all my parts from my local Murrys!
Yea, if you look close enough at my pics you can figure it out. For the rear i cut my OEM line right above the front frame rail and ran a new line from the master to that and flaired both ends and bolted them toghter...done.
Front i got a line lock. Run a new line from the master to the inlet of the line lock, then make another new line from the line lock to the "T" fitting that connects the front 2 lines into the one comming from the line lock. The brake line is super cheap but i had to go to a few auto stores to get all the fittings i needed. All in all its a pretty easy mod if you can work on things.
Front i got a line lock. Run a new line from the master to the inlet of the line lock, then make another new line from the line lock to the "T" fitting that connects the front 2 lines into the one comming from the line lock. The brake line is super cheap but i had to go to a few auto stores to get all the fittings i needed. All in all its a pretty easy mod if you can work on things.
yea, i wouldnt sweat it. There was a lot of talk about safety but i drive in the city and my area is pretty populated and i needed to slam my brakes a few times and i never had a lock up issue at all.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
hey mean94 if you could do a write up with some pictures of how you did this and the weight savings that would be great. if not then atleast tell us how it worked out for you. thank you
just removed everything including some of the wiring and on the scale showed almost 11lbs....took me 110-15 mins to remove everything i wil be posting pics up of what i have done later i have to run to the parts store to get the parts to finish it up
Yea, if you look close enough at my pics you can figure it out. For the rear i cut my OEM line right above the front frame rail and ran a new line from the master to that and flaired both ends and bolted them toghter...done.
Front i got a line lock. Run a new line from the master to the inlet of the line lock, then make another new line from the line lock to the "T" fitting that connects the front 2 lines into the one comming from the line lock. The brake line is super cheap but i had to go to a few auto stores to get all the fittings i needed. All in all its a pretty easy mod if you can work on things.
Front i got a line lock. Run a new line from the master to the inlet of the line lock, then make another new line from the line lock to the "T" fitting that connects the front 2 lines into the one comming from the line lock. The brake line is super cheap but i had to go to a few auto stores to get all the fittings i needed. All in all its a pretty easy mod if you can work on things.
how hard is it to actully remove the abs and put the linelock on, ive been wanting to do it but I wasnt sure how hard it would be
