LT1-LT4 conversion kit?
On The Tree
Joined: Feb 2008
Posts: 146
Likes: 0
It is true that the LT4 intake manifold is NLA however everything else is still sold thru GMPP. If you cant find a genuine LT4 intake then Edelbrock's Air Gap is your best bet. An LT4 intake will not bolt on to LT1 heads.
Good write up on the LT4 conversion
Good write up on the LT4 conversion
Not a good writeup as the guy who wrote it is propogating some of the common but WRONG info.
The reason a 93 TB is listed as different is because the IAC plate and motor are different and the 93 will have provisions for a TV cable. As said the fuel rail/intake manifold are different too. Nothing substantially different, just little annoying details, if you have doubts about other parts just ask.
Far as TB fitment you can buy a 94-7 TB and swap the IAC plate with your existing one or heck I have a spare I would let go cheap with IAC motor and with your M6 no TV cable concerns. I a running a "93" TB on my car, just swapped the IAC baseplate and the TV cable provisions are just unused.
The reason a 93 TB is listed as different is because the IAC plate and motor are different and the 93 will have provisions for a TV cable. As said the fuel rail/intake manifold are different too. Nothing substantially different, just little annoying details, if you have doubts about other parts just ask.
Far as TB fitment you can buy a 94-7 TB and swap the IAC plate with your existing one or heck I have a spare I would let go cheap with IAC motor and with your M6 no TV cable concerns. I a running a "93" TB on my car, just swapped the IAC baseplate and the TV cable provisions are just unused.
On The Tree
Joined: Feb 2008
Posts: 146
Likes: 0
Not a good writeup as the guy who wrote it is propogating some of the common but WRONG info.
The reason a 93 TB is listed as different is because the IAC plate and motor are different and the 93 will have provisions for a TV cable. As said the fuel rail/intake manifold are different too. Nothing substantially different, just little annoying details, if you have doubts about other parts just ask.
Far as TB fitment you can buy a 94-7 TB and swap the IAC plate with your existing one or heck I have a spare I would let go cheap with IAC motor and with your M6 no TV cable concerns. I a running a "93" TB on my car, just swapped the IAC baseplate and the TV cable provisions are just unused.
The reason a 93 TB is listed as different is because the IAC plate and motor are different and the 93 will have provisions for a TV cable. As said the fuel rail/intake manifold are different too. Nothing substantially different, just little annoying details, if you have doubts about other parts just ask.
Far as TB fitment you can buy a 94-7 TB and swap the IAC plate with your existing one or heck I have a spare I would let go cheap with IAC motor and with your M6 no TV cable concerns. I a running a "93" TB on my car, just swapped the IAC baseplate and the TV cable provisions are just unused.
You think an LT4 intake will bolt on to your LT1?
Are you smoking crack dude? What the hell does a throttle body have to do with the LT4 vs the LT1 anyway? Do you even know WTF you are talking about? I think the information was just a little over your head. Sorry to say.
You think an LT4 intake will bolt on to your LT1?
You think an LT4 intake will bolt on to your LT1?
In 1993 it was the 4L60, basically a fancy term for a 700R4, and needed porvisions on the Throttle Body for a Kick-Down Cable.
As far as the IAC Plate under it, I have never seen the difference with a 1993 vs. the later ones in person, but I'm willing to bet that is has something to do with the Kick-Down Cable provisions.
An LT4 Intake will bolt to a LT1, but it will not function correctly as designed.
And as far as your Throttle Body question.. it was mentioned here as a question..
Does anyone know what the difference is between a 93 LT1 and 94-97 LT1's?
just wondering cuz they have different 93 lt1 throttle bodies seperate from 94-97 throttlebodies and other things, and the LT4 kit says it's only for 94-97 LT1's. I'm new to 4th gens, because I own 5 3rd gens and know every inch of those.
just wondering cuz they have different 93 lt1 throttle bodies seperate from 94-97 throttlebodies and other things, and the LT4 kit says it's only for 94-97 LT1's. I'm new to 4th gens, because I own 5 3rd gens and know every inch of those.
On The Tree
Joined: Feb 2008
Posts: 146
Likes: 0
The guy starts talking trash about throttle bodies when everyone else is talking about the LT4 conversion kit. Everyone knows the speed density intakes and throttle bodies were diffrent in 1993. They were diffrent in 1994-1995 and then diffrent again in 1996-1997 on vehicles with ASR/Traction control. Dont make me laugh any harder
Ok I told you not to make me laugh any harder but this takes that cake! LOL Go sit in the corner with your dunce hat on. You have been found wanting.
Oh and for your information the LT4 intake WILL NOT bolt on to LT1 heads....
Two numb-skulls in less than 10 mins! This is better than comedy central!
Oh and for your information the LT4 intake WILL NOT bolt on to LT1 heads....
Two numb-skulls in less than 10 mins! This is better than comedy central!
You are right the LT4 intake will not bolt to LT1 heads but do you understand WHY??
All the TB talk was in response to post #20. I can provide pics of the difference in the 93 and 94+ IAC baseplates.
I have to wonder if you are the one smoking crack, I never said an LT4 intake would bolt to an LT1. But the missinformation in the link you posted does relate to the intake. I stopped reading after that because it looks like the same old moronic BS posted about mediocre parts pretending they are good.
All the TB talk was in response to post #20. I can provide pics of the difference in the 93 and 94+ IAC baseplates.
I have to wonder if you are the one smoking crack, I never said an LT4 intake would bolt to an LT1. But the missinformation in the link you posted does relate to the intake. I stopped reading after that because it looks like the same old moronic BS posted about mediocre parts pretending they are good.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo On The Tree
Joined: Feb 2008
Posts: 146
Likes: 0
I have to wonder if you are the one smoking crack, I never said an LT4 intake would bolt to an LT1. But the missinformation in the link you posted does relate to the intake. I stopped reading after that because it looks like the same old moronic BS posted about mediocre parts pretending they are good.
If you know the difference then tell us what it is??
The TB thing has been explained as I was answering questions asked in this thread.
Now your rambling on rockers????? that I wonder where it came from?
I agree shaft rockers are better than stud mount, pretty certain budget is the reason most of us stick with stud mount.
Most of us operate on a budget and IMO doing so is very instructive, caused more than one guy who threw money at a build rather than knowldge to go home making excuses.
The TB thing has been explained as I was answering questions asked in this thread.
Now your rambling on rockers????? that I wonder where it came from?
I agree shaft rockers are better than stud mount, pretty certain budget is the reason most of us stick with stud mount.
Most of us operate on a budget and IMO doing so is very instructive, caused more than one guy who threw money at a build rather than knowldge to go home making excuses.
Ok I told you not to make me laugh any harder but this takes that cake! LOL Go sit in the corner with your dunce hat on. You have been found wanting.
Oh and for your information the LT4 intake WILL NOT bolt on to LT1 heads....
Two numb-skulls in less than 10 mins! This is better than comedy central!
Oh and for your information the LT4 intake WILL NOT bolt on to LT1 heads....
Two numb-skulls in less than 10 mins! This is better than comedy central!
You take the douche title at this point with that there bro..
I don't know the specifics about LT4 stuff, but I can tell you that a LS7 Intake won't bolt on to L92/LS3 Heads, and I can show you as well..
And like mentioned above by me, there was a question about a TB and Caprice adressed it..so far a couple of us have mentioned that..lets see if you can pick that up this time.
On The Tree
Joined: Feb 2008
Posts: 146
Likes: 0
I already gave out the link but you were too busy trying to tell people it was mis-information.
I will give it to you one more time.
Will an LT4 intake bolt onto LT1 heads?? Click here to find out.
Sorry, but after the 1000th time I get a little tired of typing it.
I will give it to you one more time.
Will an LT4 intake bolt onto LT1 heads?? Click here to find out.
Sorry, but after the 1000th time I get a little tired of typing it.
