Hot Cam...

Reply Subscribe

Thread Tools

Search this Thread

Apr 22, 2008 | 09:26 PM

#21

StealthFormula

11 Second Club

iTrader: (35)

Joined: Apr 2005

Posts: 4,798

Likes: 54

From: Skippack, PA

Quote:

Originally Posted by Green3spd

Can you get the LT4 cam in a 110LSA?

No the hot cam only comes the way it shows which is on a 112lsa. I think he meant to say you could get the cc305 done on a 110 which you can.

Apr 22, 2008 | 09:29 PM

#22

Green3spd

Thread Starter

TECH Fanatic

iTrader: (7)

Joined: Oct 2007

Posts: 1,177

Likes: 1

From: Little Rock, Ar

Quote:

Originally Posted by StealthFormula

No the hot cam only comes the way it shows which is on a 112lsa. I think he meant to say you could get the cc305 done on a 110 which you can.

ya, my friend had an Hot Cam in his LS1 and you could get it in a 110 and 112LSA... he had the 110 and it sounded SO MUCH BIGGER than just a hot cam... that car surprised ALOT of people and made good power... like 352hp, auto, no stall...no heads or intake

Apr 22, 2008 | 09:31 PM

#23

SS MPSTR

11 Second Club

iTrader: (1)

Joined: Jun 2003

Posts: 1,510

Likes: 1

From: SoCal

Comp will grind the 305 on a 110 LSA for you.

Apr 22, 2008 | 09:40 PM

#24

StealthFormula

11 Second Club

iTrader: (35)

Joined: Apr 2005

Posts: 4,798

Likes: 54

From: Skippack, PA

Quote:

Originally Posted by Green3spd

thats actually kinda bad. I dynoed just 22hp less if thats the case and with an LT1 with at the time just full exhaust and rockers. I've seen many cammed A4 LS1's hit the 370's-380's mark and some beyond but they were pretty large. In terms of the lt4 cam for lt1's only the 112 is available.

Apr 22, 2008 | 09:49 PM

#25

Green3spd

Thread Starter

TECH Fanatic

iTrader: (7)

Joined: Oct 2007

Posts: 1,177

Likes: 1

From: Little Rock, Ar

Quote:

Originally Posted by StealthFormula

ya, 370-380hp is about average for an LS1 with a nice size cam...
But for a Hotcam and a STOCK V6 airbox and LTs...(used to be a V6 car)...

Apr 22, 2008 | 09:52 PM

#26

Green3spd

Thread Starter

TECH Fanatic

iTrader: (7)

Joined: Oct 2007

Posts: 1,177

Likes: 1

From: Little Rock, Ar

Im looking for some 1.6 Roller Rockers... are these ok to use?
http://store.summitracing.com/partde...6&autoview=sku

Apr 23, 2008 | 05:27 AM

#27

grn95t/a

11 Second Club

iTrader: (10)

Joined: Nov 2006

Posts: 802

Likes: 0

From: york county, va.

if you use them you will need guide plates and hardend pushrods also. they are not self aligning.

Apr 23, 2008 | 07:51 AM

#28

Green3spd

Thread Starter

TECH Fanatic

iTrader: (7)

Joined: Oct 2007

Posts: 1,177

Likes: 1

From: Little Rock, Ar

I was thinking of getting these springs, will they work?
http://store.summitracing.com/partde...5&autoview=sku
They dont say the max lift for them...
If I should use these, then will these retainers work?
http://store.summitracing.com/partde...5&autoview=sku

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0

Brett Foote

10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever

Verdad Gallardo

Apr 23, 2008 | 08:44 AM

#29

Bad_tx_Z28

TECH Resident

iTrader: (3)

Joined: Sep 2007

Posts: 829

Likes: 1

From: St Petersburg Florida

Quote:

Originally Posted by StealthFormula

Check out the Advanced Induction 218/226 .540/.540 112lsa cam which is known to make up to another 15hp/tq than the hot cam and is essentially the same duration. Also has a much better lobe design over the lazy lobes of the lt4.

you have any more info on this cam??