View Poll Results: which is easier top or bottom
top
2
8.33%
bottom
22
91.67%
Voters: 24. You may not vote on this poll
LT's install, easier from top or bottom?
What headers are you installing and how thick is the flange...
The length of bolt to use may depend on the flange...
for pacesetters i would use 1" bolts because of the 3/8" flange and you want the most thread to thread contact that you can get...
if it's a 1/4" inch flange then i would say that the 3/4" bolts will do fine...
The length of bolt to use may depend on the flange...
for pacesetters i would use 1" bolts because of the 3/8" flange and you want the most thread to thread contact that you can get...
if it's a 1/4" inch flange then i would say that the 3/4" bolts will do fine...
I would think about getting some gaskets, i have no experience using the pacesetter gaskets but heard they were good and bad so i got some percy's for like 30 bucks from summit. other than that i think you got it covered. oh yeah go in from the bottom.
Yes get the percy's, the cardboard crap comes with pacesetters.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
