How to building LT1 for procharger
Thread Starter
TECH Fanatic
Joined: Jun 2002
Posts: 1,124
Likes: 0
From: kuwait
How to building LT1 for procharger Hello guys...
My friend want to rebuild his engine with a procharger system, from 12-15 psi what are the modifications needed?
allready have some those mods M6/LT1 Trans Am 1993 355ci :
>Heads S2 2.02/1.65
>LT1 intake ported
>Jet chip
>pistons TRW
>Comp Cam 510/510"
>McLeod dual clutch
>aluminum driveshaft
>Accel ignition systems
>Meziere Electric Water Pump
>Pulleys
>Accel wires
>BBK 58mm
>RR GM 1.6 LT4
>Comp cams dual springs
>Hooker headers & custom Y pip 2"
>Flowmaster catback 3"
Thank you for advance
My friend want to rebuild his engine with a procharger system, from 12-15 psi what are the modifications needed?
allready have some those mods M6/LT1 Trans Am 1993 355ci :
>Heads S2 2.02/1.65
>LT1 intake ported
>Jet chip
>pistons TRW
>Comp Cam 510/510"
>McLeod dual clutch
>aluminum driveshaft
>Accel ignition systems
>Meziere Electric Water Pump
>Pulleys
>Accel wires
>BBK 58mm
>RR GM 1.6 LT4
>Comp cams dual springs
>Hooker headers & custom Y pip 2"
>Flowmaster catback 3"
Thank you for advance
Thread Starter
TECH Fanatic
Joined: Jun 2002
Posts: 1,124
Likes: 0
From: kuwait
Re: How to building LT1 for procharger What about the piston and ring sets, TRW 9.5 compression and manly ring sets enough for 12-15 PSI
did this cam will work with 12-15 psi??
The car it's not for daily drive and we need it for street race.
did this cam will work with 12-15 psi??
The car it's not for daily drive and we need it for street race.
