Went to back it out of the garage last night moved 3 feet and stalled. Wouldn't start back up either. Cranked but wouldn't fire O got out and fussed with the wires around the coil and module and it fired back up and ran fine. I can not see anything wrong no cut wires and all the connections look clean.
Anyone ran into this before. I am not 100% sure what I did under the hood is what fixed it but it did start again after words. I took a good insulated screw driver and jiggled all the wires with it running and it didn't stall again after that. I have not had any miss in the engine at all and seems to run ok but my 1/4 time is where a stock car should be and I have full exhaust and some other things and no traction problems.