What size injectors?

Reply Subscribe

Thread Tools

Search this Thread

Aug 7, 2008 | 12:19 PM

10.5LT1

Thread Starter

On The Tree

Joined: Jul 2008

Posts: 132

Likes: 0

From: Clinton, MD

What size injectors?

What size injectors do you need to run with a CC503? What kinda of HP can i expect from a CC503 and stock unported heads? And is the cc503 a good nitrous cam?

Aug 7, 2008 | 12:41 PM

DAVE00

TECH Fanatic

iTrader: (10)

Joined: Jul 2007

Posts: 1,739

Likes: 2

From: Houston, TX

Quote:

Originally Posted by 10.5LT1

What size injectors do you need to run with a CC503? What kinda of HP can i expect from a CC503 and stock unported heads? And is the cc503 a good nitrous cam?

Unless your boosting or spraying, I wouldn't go any larger than 30#ers and the stock 24's will probably be just fine. As to the hp, not exactly sure.

Aug 7, 2008 | 12:50 PM

Elliott's94Z

Banned

iTrader: (12)

Joined: Mar 2008

Posts: 4,370

Likes: 1

From: Oregon Grown

Quote:

Originally Posted by 10.5LT1

What size injectors do you need to run with a CC503? What kinda of HP can i expect from a CC503 and stock unported heads? And is the cc503 a good nitrous cam?

I would look into the Red top SVO's #30lb. I saw a dyno page at one point and the cc503 made about 35 extra hp at about 5000 rpms.

Aug 7, 2008 | 03:24 PM

10.5LT1

Thread Starter

On The Tree

Joined: Jul 2008

Posts: 132

Likes: 0

From: Clinton, MD

With a mild porting what kinda HP can i expect

Aug 7, 2008 | 04:09 PM

LM97Z

TECH Fanatic

iTrader: (4)

Joined: Feb 2008

Posts: 1,291

Likes: 0

From: S.W. Missouri

Quote:

Originally Posted by 10.5LT1

With a mild porting what kinda HP can i expect

It all depends on the port work done, the bowl area is the most important area along with the short turn, you will see some nice HPer #s if the heads are done right.

Aug 7, 2008 | 05:00 PM

Elliott's94Z

Banned

iTrader: (12)

Joined: Mar 2008

Posts: 4,370

Likes: 1

From: Oregon Grown

Quote:

Originally Posted by 10.5LT1

With a mild porting what kinda HP can i expect

If you are serious about getting a cam and head work done look into these guys..good stuff. This is the route I'm going this winter. The 190cc or 200cc pkg is a good choice.
http://advancedinduction.com/AiProductsLT1.html

Aug 7, 2008 | 05:25 PM

96capricemgr

11 Second Club

iTrader: (1)

Joined: Sep 2004

Posts: 11,975

Likes: 15

For the baby shots guys run there is no sense in considering the nitrous when choosing a cam. Now start talking 250+ and then you can talk "nitrous cam".