header install help!
Thread Starter
Teching In
Joined: May 2008
Posts: 11
Likes: 0
header install help! ok, so i am putting my pacesetter mid's on today and i have been taking pics all day to post up but my dad dropped my camera into a bucket of antifreeze so i have already lose $300 today. but now for the other problem. i have the drivers side on no problem but the pass. side just wont go in its almost like its the wrong part, the tubes seem like they are too long off the flanges and i cannot get them on. ugh im takin a pizza hut break now but is there any tricks to get them in? i need any help i can get!!!!
I'd try taking the valve cover off first. With the valve cover off, my passenger side long tube slipped right in through the top.
Last edited by Spiers; Aug 18, 2008 at 08:57 AM.
You need to get the car REAL high to get them in from the bottom (unsafe high, as they call it). If your doing it from the top, then take those valvecovers off and anything else that gets in your way. You are going to need to make space.
