99.9percenter

iTrader: (2)

What pullies and rpm for 9.5 psi?

HellTeeOne

Um, only 9.5psi and 550rwhp with a F1A?

So where's the additional 8 or so psi and ~200rwhp a F1A'd stroker should be producing?

blown97ss

iTrader: (8)

i was wondering the same thing I got a d1sc with the same amount of boost with the same power output. thought the f1 would be making some killer power.

94camaroboosted

Had to have a very conservative tune due to stock lt1 computer system and the 4l60e won't take much more power without it blowing up. Need a better tranny and a 24x conversion before I turn up the boost. And had to pass sniffer test and have all the factory smog and cats in place when it was imported to canada. Going to start removing stuff in the spring.

94camaroboosted

I'll look tomorrow and see what it is.

99.9percenter

iTrader: (2)

I have a 3.4, and a 4.5 also two crank pulleys.

Jon@BruteSpeed

iTrader: (3)

Since 99.9% brought this thread back from the dead... You ever get this thing turned up??