Comp Cam XFI 292 cam in lt1
#1
Launching!
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Macomb, Michigan
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Comp Cam XFI 292 cam in lt1
What would happen if i ran the xfi 292 cam which is 242 int./248 exh. ---
0.584 int./0.579 exh. lift --- at 113 lsa in my car with long tube headers,
underdrive pulleys, a 3.73 gear, a fully built 4l60e with 3200 stall, fully ported
intake manifold, and a custom single blade giant throttle body and a few
other things in my signature?
I plan to make it a 355 possibly a 383 but for now id like to run that cam in
my current set up.
0.584 int./0.579 exh. lift --- at 113 lsa in my car with long tube headers,
underdrive pulleys, a 3.73 gear, a fully built 4l60e with 3200 stall, fully ported
intake manifold, and a custom single blade giant throttle body and a few
other things in my signature?
I plan to make it a 355 possibly a 383 but for now id like to run that cam in
my current set up.
#5
my cam is a bit smaller than that but with a lot tighter lsa, 106, and its basically a turd below 3k rpm. the tighter lsa will help drivability by bringing the torque in quicker iirc. i couldnt imagine driving a smaller cube motor with that cam