wrench487

2002 eclipse , runs good, when you press in the clutch motor skips, release clutch motor levels out .There is not noise or binding on the clutch motor just starts to skip . What's the problem?

85MikeTPI

iTrader: (9)

This happens when your muffler bearings start to wear out. Replace them and you're back in business.

Black02SLPSS

iTrader: (5)

That could honestly be a vast number of things. Only reason the motor levels out when you let off the clutch is because the drivetrain is keeping it spinning. When you start it up does it run like ****?

wrencher

iTrader: (2)

Is the 'skip" a vibration or is it a misfire????

thesource

iTrader: (60)

Did it just start doing this ?

black00ssFL

iTrader: (24)

Sorry, couldn't resist even though it's not a dsm.

wrench487

It is a misfire.

wrench487

Yes ?

wrench487

No runs good with clutch in or out until it warms up. Then it starts.

wrench487

Update...... is it possible that when you press the clutch it is forcing the crankshaft balancer out of the crankshaft sensors?

wrench487

It is plane to see you have nothing to offer this form, maybe I have a site more to your liking it is www. disneychannel .com

black00ssFL

iTrader: (24)

.....or maybe go to an Eclipse forum. If you didn't notice, the url for this forum is LS1TECH.COM. Not Eclipsetech.com. That might be why no one is answering, since no one is here to learn or talk about eclipses .

Oh and btw, what you described about the crank moving past the crank sensor is a symptom of crankwalk, which was already suggested by the nice picture above. Although it's fairly common in 7 bolt 4g63 DSM's and not in others, it does happen in other cars.

wrench487

Did go to Eclipse forum,and several others.Just thought I would pose the question to all,and have had very good response from all but you JACKASS.Truth be known a response from a Toyota Camery forum fixed the problem.To bad you won't open your mind and see the big picture, and how one problem could relate to several makes of cars &trucks.Lucky for me other poeple arn't so narrow minded.

black00ssFL

iTrader: (24)

I gave you a possibility. You ignored it. YOU started flaming because you didn't get a reply with the right information fast enough. But yet, I'm the jackass. Thanks for the email, although it was hard to understand with all the misspellings and horrible grammar. For all you know the person who would have known the answer wouldn't have posted because he felt offended by comparing our forum to the "disney channel" and didn't want to help a jackass like you. You didn't get an answer for a question about a car not specific to this car forum and we're the jackasses? This is the trouble with people today, can't get their instant gratification then they get all pissy. Maybe if you understood that those with more knowledge than just one type of car is a much narrow spectrum, then you'd understand that it would take longer to get a response since they are not the majority that are on this site. But, that must be too much to ask. Enjoy your stay, however long it lasts.

Btw, what was wrong?

ProductionS14

So what was the issue? lol

wrench487

My error , had you confused with bearing in muffler posted above.
leaving/ will not be back